Cationic Polyacrylamide

Cationic Polyacrylamide (CPAM)

Introduction
This product is a water- soluble high polymer.It’s not soluble in most organicsolvents. It has good flocculating activity, and can reduce the frictionresistance between liquid.
Specification

Application

1. This product is mainly used for the sludge dewatering to decrease moisture content of sludge.
2. This product is used in the treatment of industrial wastewater and municipal wastewater.
3. This product can be used for papermaking to improve dry and wet strength of paper and to increase the reservation of tiny fibers and fillings.

Application Method

1. It should be diluted to the concentration of 0.1%(based on solid content).It is better to use neutral or desalted water.
2. When making up solution, the product should be scattered evenly in the stirring water, usually the temperature is between 50-60℃.

Package and Storage
Packed in 25kgs woven bag with polypropylene.
This product is hygroscopic, so it is should be sealed and stored in a dry andcool place below 35℃.